Poolside FixSign in
Back to plans
SAMPLE WATER REPORT

Jordan Bennett

Poolside Fix · Oct 6, 2026

Poolside
Fix
Jordan's backyard pool18,000 gallonsplaster · chlorine
Keep the water out of use until safety stops are resolved.

These sample amounts apply only to this fictional profile. Do not use them for another pool or hot tub.

Water at a glance

ReadingYour resultTarget / referenceNext step
Free chlorine1.2 ppm2–4 ppmMeasured step
pH7.87.2–7.6Measured step
Water temperature80°FNo universal chemical target; follow equipment limits and swimmer needsSee action
Water clarityClear; bottom visibleClear; entire bottom visibleIn range
Combined chlorine0.2 ppm0.4 ppm or lessIn range
Total alkalinity90 ppm80–120 ppm for the saved surface profileIn range
Cyanuric acid45 ppm30–50 ppm routine targetIn range
Calcium hardness260 ppm200–400 ppm for the saved surface profileIn range

Water temperature: no chemical addition. Check equipment operating limits; record again with the next test.

Sample water test · Reviewed by Sample store team

SAMPLE ONLY · Fictional records1 / 2
YOUR NEXT STEPS

One product at a time.

Jordan Bennett · Oct 6, 2026

Resolve safety stops first. These are separate first-step estimates, not a list to add together. Follow each prerequisite; after any addition, wait and retest before recalculating the next. Never combine products.

Free chlorine41.5 fl oz

10% liquid chlorine (sodium hypochlorite)

First addition only. Recalculate after a fresh test.

Correct pH safety stops when the product label requires it. Add sanitizer alone with circulation running.

Check again: Circulate 30 minutes; retest after 2 hours, or longer if the label requires.

Keep separate: Do not add acid, another sanitizer, shock or algaecide during the wait.

pH20.4 fl oz

31.45% muriatic acid

First addition only. Recalculate after a fresh test.

Correct a sanitizer safety stop first unless the sanitizer label requires pH correction. Add acid alone at an open return with the pump running, following the label.

Check again: Circulate 30 minutes; retest after 2 hours, or longer if the label requires.

Keep separate: Do not add chlorine, soda ash, borax or bicarbonate during the acid wait.